Sontay... experts in Field Controls


		WD-AMX - Water Detection Alarm System
		DESCRIPTION The WD-AMX range of water leak detection modules are designed for use with the WD-CS, WD-PS and WD-RS range of water leak detection sensors. They are suitable for DIN-rail mounting inside AHUs, power distribution units or general areas where leak detection is required. They are fitted as standard with LED indication of the water leak status, and sounder that can be disabled by simply removing a jumper. The WD-AMX relay output can either configured to be manual or auto reset A relay output provides an alarm signal that can be used for connection to a BMS controller or remote alarm annunciation panel such as the UI-AA1-F FEATURES • AC detector excitation for reliability • 24Vac/dc or 230Vac versions • LED indication of leak status • Manual or auto reset alarm output • Audible alarm


		WD-CS - Water Leak Detection Cable
		DESCRIPTION These cable sensors are typically used to detect water leaks under floors and are used in conjunction with a WD-AMX controller module. Optional fixing clips are available. FEATURES • Easy to lay • Detects water along its entire length


		WD-PS - Water Leak Detection Point Sensor
		DESCRIPTION This sensor is used to detect water at a localised point and is used in conjunction with a WD-AMX controller module. FEATURES • More than one can be connected to a WD-AMX • Robust housing • Slot lugs for easy installation


		WD-RS - Rain Detection Sensor
		DESCRIPTION These sensors are used with a WD-AMX controller module to detect rain. The surface of the sensing head can be heated to avoid false detection alarms resulting from dew forming. The sensor can be swivelled on its mounting bracket and locked in place by a wing-nut. FEATURES • Heater to avoid nuisance alarms • Accurate switching


		WD-CBS - Condensation Detector
		DESCRIPTION This Condensation Detector is designed to meet the requirements for a low cost device capable of providing early warning of the onset of condensing conditions. Applications include chilled beam/ceiling systems where control safeguards are required to avoid “indoor rain”. The sensor provides either a volt-free changeover contact or current output and is housed in a small enclosure which can be strapped to the chilled surface that requires monitoring. The unit is 24Vac/dc powered. FEATURES • VFC or current output • Quick and simple to install

This range includes: (click to view individual products)
EP - Emergency Switches/Buttons and Thermal Link	LL - Light Level Controllers and Sensors	LN - LonWorks FTT Network Repeater and Terminator

MG - Gas Metering	OC - Occupancy Detectors	PM - Energy Analysers and Power Monitoring

PS - Power Output Supplies	UI - User Interfaces and Alarm Annunciators	WD - Water Detection System and Sensors

Copyright © 2008-2011 Sontay Limited. All rights reserved. Website designed and created by LaserLines.com