Sontay... experts in Field Controls


		VE-VF - Large Plug & Seat Valves (Flanged)
		DESCRIPTION VE-VF Flanged Valves provide a quality, cost effective solution for most water and chilled applications. These valves may be used with glycol concentrations of up to 50%. VE-VF valves are PN16 rated. FEATURES • PN16 • DN100 to 150 • Suitable for water or glycolic water • Suitable for use with actuator types: VE-AMV55, VE-AMV85, VE-AME55, VE-AME85 • Compliance with PED directive 97/23/EC • Stem heaters available for installations with temperatures down to –10°C


		VE-VFN - Plug & Seat Valves (Flanged)
		DESCRIPTION This new range of valves replaces the VE-VF Series from 25mm to 80mm. VE-VFN Flanged Valves provide a quality, cost effective solution for most water and chilled applications. The valves may be used with glycol concentrations of up to 50% and are PN16 rated. FEATURES • PN16 • DN25 to 80 • Suitable for water or glycolic water • Suitable for use with actuator types: VE-AMV435, VE-AME435


		VE-VRBN - Plug & Seat Valves (Screwed)
		DESCRIPTION VE-VRBZ Control Valves provide a quality, cost effective solution for most low pressure and hot water applications where threaded connections up to 40mm are required. The red bronze body and brass plug are suitable for pressures up to 16 bar and the 5.5mm stroke length gives good rangeability. FEATURES • PN16 • DN15 to 50 • Suitable for water or glycolic water • Suitable for use with actuator types: VE-AMV435, VE-AME435


		VE-VRBZ - Plug & Seat Valves (Short Stroke)
		DESCRIPTION The MW-65-1 Series is used for the measurement of cooling systems, with flow temperatures from 2 to 50°C. The flow is measured using bi-directional ultrasonic technique based on the transit time method, with long-term proven stability and accuracy. The meter is not suitable for use with any other media than water, and should not be used with non-freezing additives like glycol. FEATURES • PN16 • DN20 to 40 • Internal or external thread connection • Suitable for water or glycolic water • Suitable for use with actuator types: VT-AMV130, VT-AME130 • Compliance with PED directive 97/23/EC


		VE-AMx - Plug & Seat Valve Actuators for Larger Valves
		DESCRIPTION VE-AMVxx and VE-AMExx actuators are used with VE-VF 100mm, 125mm and 125mm plug & seat valves. FEATURES • Advanced design incorporates load related 'switch-off' to ensure that actuators and valves are not exposed to overload • Digital feedback end position indication signal for valve end position • Hand operation • Low weight and robust


		VE-AMx435 - Plug & Seat Valve Actuators
		DESCRIPTION The new range of VE-AMV435 and VE-AME435 actuators are used with the VE-VRBN and VE-VFN range of plug and seat valves from 15mm to 80mm. The actuator adapts its stroke to valve end automatically, which reduces commissioning time. They also have feedback for end position indication as standard. FEATURES • Advanced design incorporates load related ‘switch off’ of ensure that actuators and valves are not exposed to overload • Hand operation • Selectable speed adjustment • LED Indication of status on VE-AME435

This range includes: (click to view individual products)
VA - Damper, Valve and Failsafe Actuators	VB - Butterfly Valves and Actuators	VC - Pressure Independent Control Valves and Actuators

VE - Plug & Seat Valves and Actuators	VR - Rotary Shoe Valves and Actuators	VT - Terminal/Fan Coil Valves and Actuators

VZ - Zone Valves and Actuators	VS - Gas Safety and Solenoid Valves

Copyright © 2008-2010 Sontay Limited. All rights reserved. Website designed and created by LaserLines.com